We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
FOR MANAGERS AND OPERATORS
579
Plate Part
Plate Part
No.
No.
Name.
No.
No.
Name.
5
— 530
Cotter pin for fram
— 503
Screw to hold yok«
ing device spindle.
holder to shutter
3
— 531
Screws to fasten 465
casting.
to 461 (2).
2
—536-3
Guiding spool spin
— 532
Small set screw in
dle.
handle.
1
— 537
Set screw and nut.
1
— 534
Tension spring for
1
— 538
Set screw and nut.
idler bracket.
4
—539
Rollers in roller
1
—535
Pin for idler bracket.
box 485.
o
— 536
Guiding spool film
3
— 540
Upper idler spring.
slide — short.
3 &
4— 20t
Outside shutter com
2
— 536-1
Guiding spool flkn
plete.
slide — long.
3
— 24f
Crank complete.
2
—536-2
Space bushing for
— 0
Oil holes.
spool.
•S. A.
tA. P.
Edison Kinetoscope
Instructions for Model D
No. 1. — To Remove Framing Lever, 18047, P. 2, unscrew from head of the adjusting gear shaft.
No. 2.— Driving Crank, 18066, P. 1, is secured to the shaft by means of a spring catch. It is released merely by pressing on the spring and pulling outward.
No. 3.— To Remove Adjusting Gear Shaft, 18052, P. 1, and brackets 18057 and 18058, P. 1, remove screws (four of them) 17585, P. 1. The removal of these screws releases both brackets and the shaft. If it is desired still to further dissemble the parts, loosen collar set screws 2798, P. 1, whereupon you can pull the right hand bracket off the shaft together with collar 18055, P. 1. If it is desired also to remove the left hand bracket, 18058, P. 1, drive out pin in the hub of adjusting gear, 18049, P. 2, slip the gear off the shaft, and this releases the bracket.
No. 4. — To Remove the Gate, together witfr parts assembled thereon, pull out hinge rod, 18193, P. 2. If the hinge pin or gate sticks tap gently until released.
No. 5. — To Remove Aperture Plate, 19334, P. 1, remove screw 19346, P. 3, and another similar screw immediately opposite, which releases part 19320, P. 1. Next remove screws 20242, P. 1, pulling framing lever 18047, P. 2, down as far as it will go, in or,der to disclose the upper one of the screws. The removal of the four named screws releases the aperture plate, carrying with it part 19319 and film tracks 19318 and 19317 and guide rollers 19339, all shown on P. 1. The replacement of these parts is merely a reversal of the process