Optic projection : principles, installation and use of the magic lantern, projection microscope, reflecting lantern, moving picture machine, fully illustrated with plates and with over 400 text-figures (1914)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

CH. VIII] PREPARATION OF LANTERN SLIDES 207 those not especially skillful, it is probably better to draw the sketch first and then trace the sketch on glass as follows: Place the lp,ntern-slide glass on the drawing, varnish side up, and arrange it as desired. Select very thin glass for this, so that the drawing surface will be near the picture to be traced. Now with a pen or brush trace the outlines. One can also use colored inks if desired. § 321. Guide for table making and for writing. — For making lantern-slide tables or written matter direct on the slide it is best for most workers to have a guide which shall show the maximum size which can be projected (fig. 115). If one has no special guide, cross-section paper or catalogue cards will serve well. To hold the glass in position while writing or making diagrams, thumb tacks at the corners are efficient (fig. 115). § 322. Ink and pen to use on unvarnished glass. — For temporary use, as in reporting games, etc., the glass is cleaned and then the fingers rubbed over it. Now with a ball-pointed pen one can write upon the glass. The lines will be coarse, but that will not matter. One can write with an ordinary pen also, but not so surely as with a ball-pointed pen (§ 322a). The ink can be of almost any kind. The black India ink gives the sharpest images. A special ink called "glassine" has recently been put on the market. It is in six colors, white, black, red, green, blue and violet. The ink is thick and with it one can write on untreated glass with any pen, although a ball-pointed pen is here also an advantage (§ 322b). The ink is easily washed off with water so that the same glass slide can be used over and over. § 322a. The writers are indebted to Dr. E. M. Chamot for the suggestion to use the ball-pointed pens on the unvarnished glass, also the advantage of rubbing the fingers or palm over the cleaned glass to prevent the ink from spreading. According to Lewis Wright, p. 412, one can write on glass well if the glass is licked, and the thin coating of saliva so spread upon the glass is allowed to dry. The ink will not spread, and the saliva-coated glass takes the pen well. § 322b. "Glassine announcement slide ink." — This ink is made by the Thaddeus Davids Co., 127 William St., N. Y., and is supplied in I oz. (30 cc.) bottles, the full set of six colors costing $1.00. See the Moving Picture World, March, 1914.