We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
288 U.S. GOVERNMENT FILMS Servicing Hydraulic Systems U.S. Department of the Navy, 1943. Principles, construction, operation and servicing of airplane hydraulic system. Charts, cartoons and straight photog- raphy. Revision, same title, also avail- able. (SN 115; 49 frames) 41 Servicing Hydraulic Systems U.S. Department of the Navy, 1943. Straight photography, charts, and car- toons explain and demonstrate princi- ples, construction, and operation of the hydraulic system of an airplane. Stresses servicing procedures. Revision. (SN 2000; 51 frames) 41 Servicing Spark Plugs and Ignition Wiring U.S. Office of Education, 1945. (Aircraft Work Series. Power Plant Maintenance) Reviews material presented in motion picture, same title. (OE 265; 50 frames) 41 Servicing Water Cooled Condensers U.S. Office of Education, 1945. (Refrig- eration Service Series. Commercial Sys- tems No. 4) Reviews material presented in motion picture, same title. (OE 451; 37 frames) 41 Setting Up and Machining Bar Stock U.S. Office of Education, 1945. (Machine Shop Work Series. Operations on the Turret Lathe No. 4) Reviews material presented in motion picture, same title. (OE 215; 58 frames) 41 Setup for Face Milling With a Fix- ture U.S. Office of Education, 1945. (Machine Shop Work Series. Operations on the Horizontal Boring Mill No. 1) Reviews material presented in motion picture, same title. (OE 225; 37 frames) 41 Setup for Rough Line-Boring U.S. Office of Education, 1945. (Machine Shop Work Series. Operations on the Horizontal Boring Mill No. 4) Reviews material presented in motion picture, same title. (OE 228; 35 frames) 41 The Sextant U.S. Coast Guard, 1943. (Piloting Series) How to use standard sextant; how dif- ferent from micrometer sextant; how to measure altitude of sun; how to handle, clean and stow. (44 frames) 41 The Shaper U.S. Department of the Air Force, 1942. (Machine Tools Series) Parts, function, and operation; selection of cutting speeds; holding work on shaper table; precautions. (FS 1-7; 57 frames) 41 The Shaper U.S. Office of Education, 1945. (Machine Shop Work Sries. Basic Machines) Re- views material presented in motion pic- ture, same title. (OE 70; 40 frames) 41 Shaping After Template and Shap- ing Curved Edges U.S. Office of Education, 1945. (Preci- sion Wood Machining Series. Opera- tions on the Spindle Shaper No. 2) Re- views material presented in motion pic- ture, same title. (OE 319; 39 frames) 41 Sharpening a Form Relieved Cutter U.S. Office of Education, 1944. (Machine Shop Work Series. Operations on the Cutter Grinder No. 5) Reviews material presented in motion picture, same title. (OE 93; 27 frames) 41 Sharpening a Plain Helical Milling Cutter U.S. Office of Education, 1944. (Machine Shop Work Series. Operations on the Cutter Grinder No. 2) Reviews material presented in motion picture, same title. (OE 91; 41 frames) . 41