F. H. Richardson's bluebook of projection (1935)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

82 RICHARDSON'S BLUEBOOK OF PROJECTION Not over 600 volts. 0 30 Amps. I Cartridge fuse (ferrule contact). 31 60 " » ) Cartridge fuse (knife-blade contact) 61-100 101-200 201-400 ' 401-600 ' (68) An electric conductor of given diameter and composition, of commercial copper for example will carrV a fixed number of amperes only without overload. (69) But it is always possible that something such as a ground, "short" or rise in voltage will cause an abnormal current to flow and overload a circuit, setting up a bad and dangerous condition. TABLE NO. 5 Form 1. CARTRIDGE FUSE-FERRULE CONTACT 1 Rated Capacity. Amperes. A B C Voltage Length Over Terminals. Inches. Distance between Contact Clips. Inches. Width of Contact Clips. Inches. , Not over 0-30 31-60 a 2 o 3 fa 1 m 54' JJ>M 61-100 101-200 201-400 401-600 N 5V& E 7/8 S 85/g * 10H 4 5 6 m Not over / 0-30 31-60 £ 5 o 5/ fa 4 4^4 61-100 101-200 201-400 C3 | 9/8 fa 115* 6 1 I 154 (70) To guard against this we have the "fuse," which is a short piece of conductor made from an alloy that will melt at far lower temperature than copper. (/I) ine fuse is usually connected to both wires of a circuit, as shown in Fig. 22A, though in actual practice raw wire is seldom used. (72) Fuses will melt quickly at low temperature, when wires become overloaded and their