F. H. Richardson's bluebook of projection (1935)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

260 RICHARDSON'S BLUEBOOK OF PROJECTION outlined in Fig. 71. If preferred the fan may be located entirely outside the projection room. (66) The method may be utilized in either of two ways. The fan ordinarily may be used to ventilate the projection room by installing a speed control device so that it will operate at the required speed. The speed control must be so connected to the port shutter master control that when it is released it will instantly energize the fan to its full power. The other way, when there is no forced draft system, is to install a separate, smaller fan in the outlet duct for ventilation purposes only, using the large fan for emer F/RE P/QOOF CLOSET AIR. INLET /n\\ PROJECT! ON ROOM Figure 71 gencies like fire. In this case it will incur no operating expense nor will it suffer deterioration from wear. It has a distinct value as insurance against the possibility of panic in the event of fire. (67) To be effective the fan must be large enough to create a slight vacuum in the room ; therefore it must be arranged to permit the inlet opening shutters to close automatically as soon as the port shutter master control is released. An auxiliary switch should be provided to open the fan circuit when the port shutter master control is released normally, as at closing time.