F. H. Richardson's bluebook of projection (1935)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

THEORY AND WIRING OF AMPLIFIERS 553 to cathode by the extent of the voltage drop through the resistor. Details of Common Amplifier Circuits All of the foregoing can be illustrated, and any details that may still seem dubious will perhaps be made clearer, by detailed analysis of the circuits of actual theatre amplifiers. Figures 139 and 140 have been chosen for this purpose. They represent two amplifiers that are perhaps the most widely used at the present time. n A/WVWV A Fig. 138. — Method of obtaining grid bias by voltage drop in plate circuit. Circuits of Figure 139 At the bottom of Figure 139, near the right-hand corner, are two arrowheads that show connection to a 110-volt power line. Above them is the power switch of the amplifier, through which the 110-volt circuit runs to the primary or right-hand coil of the power transformer, T-3. T-3 has four secondaries, shown to the left of the three vertical lines that represent its core. Thes top secondary lights the filaments of the two type 80 rectifier tubes. Just below this is the long (high voltage) secondary that supplies plate power to those tubes, and through them to the amplifying tubes, as we shall see. Below this again is a secondary winding terminating in two arrowheads. To the left of the upper arrowhead is