F. H. Richardson's bluebook of projection (1942)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

SOUND TROUBLE-SHOOTING CHARTS 673 To Determine the Cause and Correction of LOW VOLUME, DUE TO HEAD TROUBLE THE TROUBLE TESTS I. Observe color of exciting liqht at film or p.e.c. location 2. Check exciting light focus 3. Check p.e.c. voltage with very high resistance meter, or ahead of p.e.c. load resistor with low resistance meter 4. Replace p.e.c. 5. Using high resistance ohm meter check p.e.c. output circuits, load resistor, trans-, former, etc., for partial ground or short 6. By visual inspection, ohm meter, tugging wires and replacement of parts if necessary, check between p.e.c. output and head output 7. Proceed per Trouble Test No. 6 of Chart No. 8. 8. Adjust focus 9. With spotlight gelatine and magnifier inspect exciter lamp filament while lit for sag or slope 10. Replace exciter lamp 11. Inspect optical system lens tube, lenses, prism, slit THE CONDITION FOUND Light white Light yellow Focus correct Focus poor Volt«ge normal Voltage low TROUBLE CURED Volume still low TROUBLE FOUND No trouble found TROUBLE FOUND TROUBLE FOUND TROUBLE CURED Good focus unobtainable Filament sags or slopes when hot Filament normal TROUBLE CURED TROUBLE FOUND 12. Clean oil from optical I TROUBLE CURED lenses, prism, exciter lamp, p.e.c, opening or replacing lens tube if necessary NEXT TEST • No. 2 No. 12 No. 3 No. 8 No. 4 No. 7 No. 5 No. 6 No. 9 No. 10 No. II