We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
•CABLE II (Continued)
rer Rating
DeForest
RCA Radiotron
Western Electric
Watts
Type No,
Type No,
Type No.
500
561
UV-861
270-A
1000
—
UV-851
—
5000
520-B
RCA-1652
228-A
520-M
521
10000
507
UV-207
220-B
548
UV-848
563
UV-863
20000
~
UV-858
35000
232-A
100000
UV-862
TABLE III
50
270*-A
Section 5. No licensee shall change the number of vacuum tubes or change to vacuum tubes of different power rating in the last radio stage, or change the system of modulation except upon authority from the Commission.
Section 4, The operating carrier power of. broadcast statations shall be determined from the antenna input power either (a) by direct measurement or, (b) by indirect measurement by means of the plate input power of the last radio stage.
(a) The antenna input power determined by direct measure¬ ment is the square of the antenna current times the antenna resist¬ ance at the place where the current is measured and at the operating frequency. The direct measurement of the antenna input power will be accepted as operating power provided the data on the antenna resistance measurements are submitted under oath, giving detailed description of the method used and the data taken. The antenna current shall be measured by an ammeter of accepted accuracy. This data must be submitted to and approved by the Commission before any licensee will be authorized to operate by this method of power determination.
Any licensee authorized by the Commission to determine the operating power by direct measurement of antenna input power shall not make any changes in the antenna system except upon authority from the Commission,
(b) The antenna input power shall be determined by indirect measurement from the plate input power of the last radio stage by multiplying plate voltage by the total plate current of the last radio stage and by the proper percentage given in Tables IV, V, or VI, in accordance with the power and system of modulation used,
6