We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
seconds each scene will appear on the screen, measure off, on the master film, the number of frames required for each scene, and punch a hole in the middle of the last frame. For example, in the breakdown of the “Mandolin” record already referred to, the opening musical prelude consumes 6 seconds. This would be the equivalent of 96 frames of film. Therefore, punch a hole in the 96th frame following the starting mark. Thereafter, measure the required number of frames for each successive line or stanza of the music and punch holes in the film until the entire musical-scenario has been measured. If a frame measuring device is not available, you can measure your film with an ordinary ruler, keeping in mind there are 40 frames to one foot of 16mm film and 80 frames to one foot of 8mm film.
In editing your film, use the measuring film as your guide in cutting each scene. Lay it on your editing board and fit the film scenes to correspond with the segments of measuring film between the punched holes. Be sure to allow for trimming of film during splicing.
After your film has been completely cut and edited, use the measuring film to adjust your projector so that it will be in synchronization with the turntable or phonograph that is to play the record. First, make sure of the phonograph turntable speed. It should be timed accurately at 78 R.P.M. Your film is now cut to project for a period of time equivalent to the playing of the phonograph record. In order to adjust your projector so the film will pass through it at a corresponding speed, project the measuring film and check the time it takes the various holes in the film to pass the projector gate. If it takes seven seconds for a six second segment to pass the film gate, speed up your projector and check the next segment. If the six second segment passes through the projector in four or five seconds, adjust the rheostat to slow down the projector.
When you believe you have your projector accurately timed, run the measuring film through the projector again, this time while playing the record. Thread your projector with the measuring film, placing the starting mark in the film gate at the frame aperature. Then, starting your phonograph or turntable with the record on it, project the measuring film and check the change in scenes by the flash of the holes in the film on the screen, with the lines of the music as it is played by the phonograph.
With the “Mandolin” record, the second hole in the corresponding measuring film should pass the projector gate on the last note of the six sec
The Kentucky Derby — have you ever seen it? And then gone to Loews Louisville Theatre in the evening ? It is one of the shove places of that renowned city. “ LOEW’S AND UNITED ARTISTS” is a tribute to Louisville's progress. Built in 1927 at a cost of about $2,000,000, it seats 3000 people. Completely air conditioned, it caters to a discriminating clientele. Of course, “ Locvj’s and United Artists” uses a Raven Screen.
No greater tribute to product quality can be offered any manufacturer than constant repurchase by experts. And Loew’s purchases RAVEN SCREENS exclusively. Raven’s amateur screens incorporate the same fine qualities that professionals demand. There is a Raven Screen for every purpose, for Raven makes the most varied line of fabrics, sizes and mounts. IV rite department 10 jor complete information and descriptive folder.
RAVEN SCREEN CORPORATION
314-16 EAST 35th ST. N. Y. C.
8mm
500 WATT PROJECTOR
*42»
LOWEST
PRICED
500
WATT
PROJECTOR
C OMPARE ! Brilli-trt, projection up to 7^/2 x. 1 0' •/ 1.6 Projection Lens; threaded adjustment for sharp, quick focusing • Full Die-Cast Construction; bronze finish
• Forced Draft Cooling • G. E. Lamp Socket • Livens up under-exposed film
• Projects Still Pictures vichout burning film; automatic fife protection ® Brilliant full -view Pilot light for threading; removable condenser.
Here's the very last word in home movie projection ... a worthy companion to the finest 8 mm. Movie Cameras! Beautifully designed and precision built, the new UniveX 500 Watt Projector takes all 8 mm. films, including color film and professionallymade subjects which may be rented or bought for your movie film library.
Ask your photographic dealer today to show you this amazing new UniveX Projector with its many high-priced features. Many dealers offer UniveX Movie Equipment on convenient easy-pavment terms.
i
I
FREE BOOKLET
UNIVERSAL CAMERA CORP.
Dept. P-13, New York City Sena me must rated booklet which describes the New UniveX 500 Watt Projector.
Nan
Address City
-State
HOME MOVIES FOR NOVEMBER
PAGE 467