We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
DOUBLE-BEARING INTERMITTENT\ perfect example of unit-design. The entire mechanism is precision -assembled as a unit. Accuracy (to 1/10,000 in.) of this intermittent is maintained in operation by double bearings, three times usual area, and automatic splash lubrication— with same oil (1 pint) that flows over whole projector mechanism.
FOOLPROOF FRAMING-Brenkert's
framing unit is unique . . . all gears are in constant mesh in any framing position. Smoother and quieter operation . . . much longer life . . . and again— automatically lubricated!
■low VWr-COA/STRVCr/OAt of the BRENKERT "80" makes your job easier
v&ufthintf fan. Ute ^Ueafrie
At your RCA Independent Theatre Supply Dealer
RCA Sound Systems
RCA Drive-In Theatre Equipment
Brenkert Projectors
Brenkert Projection Lamps
Snowhite Screens
RCA Tube Type Rectifiers
Westinghouse Copper-Oxide Rectifiers
Century-Roth Motor Generators
Mohawk Carpets
International Chairs
Westinghouse— Rectigons
Lamps and Fluorescent Lamps RCA Service Co.
Service and Replacement Parts
The Brenkert "80" Projector is a masterpiece of accurate sub-assembly construction for easy replacement of parts. It is easier to operate . . . and far simpler to maintain than any other projector used in modern theatres.
As an example, you can remove and replace the entire intermittent assembly— and re-time the shutter— in less time than it takes to run off a single reel! The intermittent sprocket can be replaced in one minute fat without disturbing the intermittent mechanism or projector timing.
Other time-saving advantages : the film gate assembly is held by only one hand screw, accurately aligned by two pins. One master screw adjusts all gate springs at once with uniform tension. The aperture plate slides out instantly for cleaning.
All Brenkert parts are assembled bv units, in the same easy-to-get-at way— making vour job easier — requiring less time for maintenance.
For descriptions of the many other features of the Brenkert "80", write Dept. 43-D.
THEATRE EQUIPMENT
RA DtO CORPORA T/ON of A ME RICA
ENGINEERING PRODUCTS DEPARTMENT. CAMDEN. N.J.
In Canada: RCA VICTOR Company limited, Montreal