We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
a few facts for projectionists about the
No
K Serving Science and Industry
UNIVERSAL 70/35mm
oreico
u
PROJECTORS
Projectionists who have been operating Norelco Universal 70/ 35mm projectors (over 200 theatres already have them! ) are unanimous in their reports that it's a smooth running, reliable mechanism. The big difference is that the Norelco 70/35 was designed from the ground up specifically for 70mm/ 35mm projection. It is not an adaptation of a 35mm machine. Conversions from 70mm to 35mm take less than 4 minutes and runs as high as 1500 per print are being reported by theatres!
The following check list will help you become familiar with a few of the outstanding features of the Norelco Universal 70/35 Projector:
• Fully compatible with, and quickly convertible for: 70mm or 65mm film with up to six magnetic sound tracks; 35mm CinemaScope with four magnetic or single optical sound tracks, and Perspecta-Sound, Wide Screen film of any aspect ratio with either magnetic or optical sound and standard 35mm film. • Scientifically compounded curve of light gateprevents film buckle. • Single blade, double speed conical shutter, providing highest light transmission of any projector. Leading and trailing edges have integral air scoops that aid in dissipating heat. • Rollers, drums, sprockets and film gate made from non-magnetic materials— eliminates possibility of
magnetic sound track damage and necessity for frequent degaussing. Dual sprockets on all shafts machined of hardened aluminum alloy. No sprocket change required when changing from 70mm to 35mm or vice versa. (Less than 4 minutes required. ) • Two independent motors on each projector, 24 and 30 fps— all past, present or contemplated 70mm films can be projected without additional expense or modification. • Combination ten-track magnetic clusters, no tricky threading required when changing from six to four-track reproduction.
• Triple filtered metered lubrication system. • Substantially constructed for rock steady projection. • All modern domestic high-power arc lamps adaptable without loss of efficiency.
• Lathe bed lens carriage, positive alignment of lens to film path. • Factory installed internal wiring, reduces installation costs. • Adjustable for all projection angles— from 28 degrees downward to the upward angles required in drive-ins. • Complete stock of replacement parts always available. • Full Underwriters' Laboratories Approved.
Norelco projection equipment is now available through your favorite theatre supply dealer.
NORTH AMERICAN PHILIPS COMPANY, INC MOTION PICTURE EQUIPMENT DIVISION
100 East 42nd Street . New York 17, NY. • OXford 7-3600