We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
ORD CATEGORY INDEX
For tvnopait tee page No.
The Engine Lathe — Cutting a Taper with the Compound Rest and with the
Taper Attachment TF 25-335 (10 min — 1941 — Film Reference — From US Office of Education Film No. 8) 427
The Engine Lathe — Drilling, Boring, and Reaming Work Held in Chuck TF 25-336 (10 min— 1942— Film Reference — From US Office of Education Film No. 9) 427
The Engine Lathe — Cutting an External National Fine Thread TF 25-337 (12 min — 1942— Film Reference — From US Office of Education Film No. 10) - 427
The Milling Machine
TF 25-338 (7 min — 1942— Film Reference — From US Office of Education Film No. 11) — 427
The Milling Machine — Cutting Keyways
TF 25-339 (15 min — 1942— Film Reference — From US Office of Education Film No. 12) .- 427
The Milling Machine — Straddle and Surface Milling to Close Tolerances
TF 25-340 (27 min — 1942— Film Reference— From US Office of Education Film No. 13) 427
The Milling Machine— Straddle Milling
TF 25-341 (17 min — 1942— Film Reference — From US Office of Education Film No. 14) 428
The Milling Machine — Plain Indexing and Cutting a Spur Gear
TF 25-342 (25 min— 1942— Film Reference— From US Office of Education Film No. 15) 428
The Vertical Boring Mill — Rough Facing, Turning, and Drilling on a Vertical Turret Lathe
TF 25-343 (31 min— 1942— Film Reference— From US Office of Education Film No. 16) 428
The Vertical Boring Mill— Rough Facing, Boring, and Turning a Shoulder on a Vertical Turret Lathe
TF 25-344 (22 min— 1942 — Film Reference — From US Office of Education
Film No. 17) 428
The Vertical Boring Mil! — Facing, Turning, Boring, Grooving, Chamfering on a Vertical Turret Lathe, Using two Heads
TF 25-345 (31 min— 1942— Film Reference— From US Office of Education
Film No. 18). _. 428
Cutting a Keyway on a Finished Shaft
TF 2.5-624 (13 min — 1942 — Film Reference — From US Office of Education
Film No. 19) „ 428
Drilling and Tapping a Cast Steel Valve Body
TF 25-626 (19 min— 1942— Film Reference— From US Office of Education
Film No. 22) 428
Drilling to a Lay-Out and Spotfacing a Cast Iron Valve Body
TF 25-627 (15 min— 1942— Film Reference— From US Office of Education
Film No. 23) _ -— 429
Machining a Tool Steel V Block
TF 25-628 (20 min— 1942— Film Reference— From US Office of Education
FUm No. 21) _ 429
134