We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
NUMERICAL INDEX
TF No.
21-2306
21-2720
25-152
25-333
25-334
25-335
25-336
25-337
25-338
25-339
25-340
GTAs, chalkboards, film strips, slides, transparencies, working models, and motion pictures (23 niin — 195G — Film Ilefcrence). Military Instruction — Part IV — Speech Techniques
Gaining attention of students — Diction — Mannerism — Stance — Delivery (11 min — 1956 — Film Reference).
Code of the Fighting Man
Explains the moral obligations of the individual soldier in accordance with the precepts of the Code of Conduct for the fighting man while in the service of his country — This Code is composed of six articles which are portrayed in dramatized situations (55 min — 1959 — Film Reference) Ignition and the Spark Plug
Fundamentals of construction, operation, and maintenance of spark plugs and ignition systems used in motor veliicles (21 min — 1941). The Engine Lathe — Rough Turning Between Centers
Setting up engine lathe for a rough turning job between centers — Piece already cut to length and centered — Safety precautions in dress and work — Various controls on lathe (15 min — 1941 — Film Reference — From US Office of Education Film No. 6).
The Engine Lathe — Turning Work of Two Diameters
Sequence of operations in turning a gear blank with a shaft from a solid piece of round stock (14 min — 1941 — Film Reference — From US Office of Education Film No. 7).
The Engine Lathe — Cutting a Taper With the Compound Rest and With the Taper Attachment
Operations when turning sharp taper on level gear blank with compound rest and slight taper on shaft with taper attachment (10 min — 1941— Film Reference— From US Office of Education Film No. 8).
The Engine Lathe — Drilling, Boring, and Reaming Work Held in Chuck
Operations when cutting tapered hole in solid forged steel gear blank — Operations in centering piece in chuck, rough facing, drilling, tapered boring, and reaming (10 min — 1942 — Film Reference — From US Office of Education Film No. 9).
The Engine Lathe — Cutting an External National Fine Thread
Various shapes and uses of national fine thread — Procedures for cutting thread on lathe (12 min — 1942 — Film Reference — From US Office of Education Film No. 10).
The Milling Machine
Parts of earliest standard plain milling machine — Capabilities, operation, and work accomplished on it (7 min — 1942 — Film Reference — From US Office of Education Film No. 11).
The Milling Machine — Cutting Keyways
Setting up shaft on table of milling machine for cutting keyway at each end — Selection of cutter — Determination of speed and feed — Setting machine for depth and length of cut (15 min — 1942 — Film Reference — From US Office of Education Film No. 12). The Milling Machine — Straddle and Surface Milling to Close Tolerances
Methods and procedure followed when rough milling a solid bar of stock — Finish milling of same piece to given shape and size (27 min — 1942— Film Reference— From US Office of Education Film No. 13).
427