We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
NUMERICAL INDEX
TP No. 25-341
25-342
25-343
25-344
25-345
25-346
25-347
25-349
25-350
25-624
25-626
The Milling Machine — Straddle Milling
Procedures followed when straddle milling a pair of connecting rods held in a fixture — Function of fixtures in production work illustrated (17 min — 1942 — Film Reference — From US Office of Education Film No. 14). The Milling Machine — Plain Indexing and Cutting A Spur Gear
Setup of milling machine — Use of dividing head — Cut of 8-pitch spur gear with 36 teeth (25 min — 1942 — Film Reference — From US Office of Education Film No. 15).
The Vertical Boring Mill — Rough Facing, Turning, and Drilling on a Vertical Turret Lathe
Operations used in rough facing, turning, and drilling aluminum casting held in chuck jaws of vertical turret lathe (31 min — 1942 — Film Reference — From US Office of Education Film No. 16).
The Vertical Boring Mill — Rough Facing, Boring, and Turning a Shoulder on a Vertical Turret Lathe
Tooling a vertical turret lathe for work requiring independent use of vertical and side heads (22 min — 1942 — Film Reference — From US Office of Education Film No. 17).
The Vertical Boring Mill — Facing, Turning, Boring, Grooving, Chamfering on a vertical Turret Lathe, Using two Heads
Tooling a vertical turret lathe for work requiring simultaneous use of both vertical and side heads (31 min — 1942 — Film Reference — From US Office of Education Film No. 18).
Steel Rule
Steel rule in detail — Various forms in general uses — Fractional scales — Correct use (14 min — 1942 — Film Reference — From US Office of Education Film No. 1).
Micrometer
Various forms of micrometers — Reading micrometers — Use and care (15 min — 1942 — Film Reference — From US Office of Education Film No. 2).
Vernier Scale
Principles of vernier scale — Its application to precision measurement (19 min — 1942 — Film Reference — From US Office of Education Film No. 4).
Height Gages and Standard Indicator
Fundamental principles of vernier height gage — Various forms of standard indicators — Their use (12 min — 1942 — Film Reference — From US Office of Education Film No. 5).
Cutting a Keyway on a Finished Shaft
The shaper — Parts and controls — Procedures and precautions in cutting keyway in end of finished steel shaft (13 min — 1942 — Film Reference — From US Office of Education Film No. 19). Drilling and Tapping a Cast Steel Valve Body
Techniques used when drilling and tapping blind holes in cast steel on a radial drill — Drill jig with loose bushings used for locating holes (19 min— 1942 — Film Reference— From US Office of Education Film No. 22).
428