Journal of the Society of Motion Picture Engineers (1930-1949)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

1949 FILM VAULTS 197 SHELF STORAGE — SECONDARY PROTECTION If the custodian does not want to take the risks inherent in openrack storage (just described), two solutions to his problem are suggested: (1) shelf storage for films of secondary values and (2) cabinet storage for films of primary values. Both shelf and cabinet storage, designed by the author several years ago, may be found in the National Archives Building, Washington, D. C., but are discussed here with certain improvements suggested. In the case of shelf storage, the cans are stored flat to prevent damage from water. The upright partitions are increased in number I Aj J_ rFUUTTER. TYPE KlfcM8«.ANE OR SHATTER. GL^SS C ^WATER. SUPPLY LINE-) f BAFFLES^ plRE TRAP^ 2 I S \*> \* \ 7 s I </> 4. u | ' ' S fb 0 1 3 1 0 F 0 .A I ^c f". /° >RM I ^ SCUPPER. Fig. 1 — Side-view elevation. A, flue to exterior; B, ceiling or roof line; C, sprinkler heads; D, floor. from one every 36 inches (open-rack storage) to one approximately every 12 inches; that is, one for each tier of film cans. Such proximity of partitions limits the unit load involved in the horizontal spread of fire. (See Fig. 1.) The shelves are solid with a maximum of heat resistance and a minimum of heat conductivity and serve as insulators against a vertical spread of fire. (See Fig. 2.) NOTE : In some instances where horizontal storage has been adopted, the cans rest on short flanges that are anchored to the sides of the upright partitions. In such a case it is argued that the use of such flanges, instead of solid shelves, allows the water from the sprinkler heads to reach each can in full volume. It should be pointed out, however, that water by itself may not prevent a spread of a nitrate