We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
CATEGORY INDEX ORD For synopsis see page No. Micrometer TF 25-347 (15 min—1942—Film Reference—From US Office 358 of Education Film No. 2). Fixed Gages TF 25-348 (17 min—1942—Film Reference—From ITS Office 358 of Education Film No. 3). Machine Shop Work—Bench Work—Scraping Flat Surfaces Misc 7501 (14 min—1954—From US Office of Education Film 199 No. 35). Rotary Machines MF 55-8524 (20 min—1955—From Navy Film MN 27) 249 Machine Shop Work—Bench Work—Cutting Threads With Taps and Dies MF 9-8338 (19 min—1954—From US Office of Education Film 208 No. 34). Machine Shop Work—Bench Work—Reaming with Straight Hand Reamers MF 9-8339 (20 min—1954—From US Office of Education Film 201 No. 37). Behind the Shop Drawing MF 8-1132 (16 min—1945^From Navy Film MN 37) 204 Carpentry—Part I: Measuring, Marking, and Leveling TF 5-1152 (12 min—1943—Film Reference) 293 Carpentry—Part II: Driving and Chopping TF 5-1153 (13 min—1943—Film Reference) 293 Carpentry—Part III: Sawing and Boring TF 5-1154 (16 min—1943—Film Reference) 293 Carpentry—Part IV: Planing and Chiseling TF 5-1155 (14 min—1943—Film Reference) 293 The Engine Lathe—Rough Turning Between Centers TF 25-333 (15 min—1941—Film Reference—From US Office 356 of Education Film No. 6). The Engine Lathe—Turning Work of Two Diameters TF 25-334 (14 min—1941—Film Reference—From US Office 356 of Education Film No. 7). The Engine Lathe—Cutting a Taper With the Compound Rest and With the Taper Attachment TF 25-335 (10 min—1941—Film Reference—From US Office 357 of Education Film No. 8). The Engine Lathe—Drilling, Boring, and Reaming Work Held in Chuck TF 25-336 (10 min—1942—Film Reference—From US Office 357 of Education Film No. 9). The Engine Lathe—Cutting an External National Fine Thread TF 25-337 (12 min—1942—Film Reference—From US Office 357 of Education Film No. 10). Machine Shop Work—Operations on the Lathe—Turning a Taper with the Tailstock Set Over MF 9-8335 (18 min—1954—Commercial Adaptation) 208 AGO 10118B 109