We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
ORD CATEGORY INDEX Machining a Rectangular Cast Iron Block TF 25-625 (15 min—1942—Film Reference—From US Office of Education Film No. 20). Machining a Tool Steel V Block TF 25-628 (20 min—1942—Film Reference—From US Office of Education Film No. 21). Machine Shop Work—Basic Machines—The Shaper MF 9-8336 (15 min—1954—From US Office of Education Film No. 70). Cutting a Keyway on a Finished Shaft TF 25-624 (13 min—1942—Film Reference—From US Office of Education Film No. 19). The Milling Machine TF 25-338 (7 min—1942—Film Reference—From US Office of Education Film No. 11). The Milling Machine—Cutting Keyways TF 25-339 (15 min—1942—Film Reference—From US Office of Education Film No. 12). The Milling Machine—Straddle and Surface Milling to Close Tolerances TF 25-340 (27 min—1942—Film Reference—From US Office of Education Film No. 13). The Milling Machine—Straddle Milling TF 25-341 (17 min—1942—Film Reference—From US Office of Education Film No. 14). The Milling Machine—Plain Indexing and Cutting a Spur Gear TF 25-342 (25 min—1942—Film Reference—From US Office of Education Film No. 15). The Vertical Boring Mill—Rough Facing, Turning, and Drilling on a Vertical Turret Lathe TF 25-343 (31 min—1942—Film Reference—From US Office of Education Film No. 16). The Vertical Boring Mill—Rough Facing, Boring, and Turn- ing a Shoulder of a Vertical Turret Lathe TF 25-344 (22 min—1942—Film Reference—From US Office of Education Film No. 17). The Vertical Boring Mill—Facing, Turning, Boring, Grooving, Chamfering on a Vertical Turret Lathe, Using Two Heads TF 25-345 (31 min—1942—Film Reference—From US Office of Education Film No. 18). Drilling and Tapping a Cast Steel Valve Body TF 25-626 (19 min—1942—Film Reference—From US Office of Education Film No. 22). Drilling to a Lay-Out and Spotfacing a Cast Iron Valve Body TF 25-627 (15 min—1942—Film Reference—From US Office of Education Film No. 23). The Use and Abuses of Twist Drills TF 10-933 (27 min—1942—Film Reference) Air Compressor and Air Tools TF 5-623 (21 min—1942—Film Reference) 110 For aynopaih see page No. 358 359 208 358 357 357 357 357 357 357 358 358 358 358 330 292 AGO lOllHB