We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
MF No. NUMERICAL INDEX to heating and bending (19 min—1955—From Navy Film MN 2337C). 55-8539 General Motors Diesel Engine Unit Injector—Maintenance Disassembly, cleaning, and inspection of parts—Lapping of check valves (18 min—1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command —From Navy Film MN 2769A). 55-8540 General Motors Diesel Engine Unit Injectors—Disassembly and Assembly Model 278 Disassembly and reassembly procedures—Timing of rack— Testing assembled injector (18 min—1955—Distribution to central film and equipment exchanges in CONUS and Transpor- tation Command—From Navy Film MN 2769B). 55-8541 General Motors 16-278A Diesel Engine — Disassembly Inspection of blower rotors and pistons - Removal of heads of wear ridge, connecting rod bearing—Pull'ng of piston (35 min —1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command—From Navy Film MN 3707A). 55-8542 General Motors 16-278A Diesel Engine—Bearings Removal of main bearing—Inspection, "miking," and installa- tion of bearing shells (10 min—1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command—From Navy Film MN 3707B). 55-8543 General Motors 16-278A Diesel Engine—Part I—Re- assembly Installation of liner, piston assembly, cylinder head and rocker level assembly (22 min—1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command —From Navy Film MN 3707C). 55-8544 General Motors 16-278A Diesel Engine—Part II—Re- assembly—Head Installation of injector and controls, valve bridges and rocker shaft—Assembly and timing of injector and exhaust (26 min— 1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command—From Navy Film MN 3707D). 55-8545 General Motors 16-278A Diesel Engine—Part I—Bench Work Removal of valves, over speed trip assembly, transfer block and check valve (12 min—1955—Distribution to central film and equipment exchanges in CONUS and Transportation Command —From Navy Film MN 3707E). 55-8546 General Motors 16-278A Diesel Engine—Part II—Bench Work Cleaning and inspecting head—"Miking" guides and valves— Resurfacing and lapping valves (19 min —1955—Distribution to central film and equipment exchanges in CONUS and Transpor- tation Command—From Navy Film MN 3707F). AGO 10118B 251