Motion picture projection : an elementary text book (1928)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

556 MOTION PICTURE PROJECTION TO REMOVE INTERMITTENT CASING COVER To remove the intermittent casing cover B-8, P.4, remove intermittent casing complete as already described, and remove intermittent bushing, star, and sprocket as outlined in paragraph 5. In the hub of the casing cover will be found a hole (not the threaded one) into which is inserted the pin of the Simplex spanner wrench, which wrench is so shaped that it encircles the outer radius of this hub, and tap the wrench with a small hammer to start the cover. The screw in the cover being a standard right-hand thread, unscrews with the spanner wrench toward the left. REMOVING CAM To remove cam B-16, P.5, first remove the intermittent casing complete as directed above, next take out the bushing, star and sprocket, and unscrew casing cover as per instructions above. Now scratch-mark both intermittent gears to insure the same mesh when replacing. Then loosen set-screw in collar on end of star wheel cam, B-16, P.5. Remove this collar and grasp the star wheel cam, pulling same outward, which operation will remove the cam, gear and spindle complete. TO REMOVE FLY WHEEL SHAFT In removing the fly wheel shaft, S-454-B, P.3, follow out all instructions in the foregoing paragraph. Then remove or loosen fly wheel set-screw, S-512-B, P.3, and pull off the fly wheel, which will