We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
HANDBOOK OF PROJECTION FOR
Motor Generators
May a motor generator be heavily overloaded for a short space of time ? 494
What is a "motor generator? Of what does it consist ? 494
What advantage has the series type motor generator over the multiple type when using the ordinary arc? 494
Has the motor generator with a 70 volt generator
advantages ? 495
Inefficiency Not Necessarily Fault of Machine
Is inefficiency in a motor generator necessarily the fault of the machine itself ? 495
Where and how should a motor generator be installed? 495 to 499
Why is a basement location objectionable? 495
Is there any real objection to locating motor generator in or immediately adjacent to the projection room ? 496
Should the frame of motor generator be grounded? 497
What is especially important if the sub-base be dispensed with ? 497
What should be placed under every motor generator set having a sub-base ? 498
Why is it necessary that a motor generator of the
horizontal type set perfectly level endwise? 498
No Sub-Base, Bolt Solidly Down
Must motor generators having no sub-base but coupled armature shafts be bolted solid to a rigid, perfectly level foundation ? 498
Should electrical connections be made by projectionist ? 498
What should be done before starting a new set?... 499
How should oil for motor generator be selected?... 499
What is important in selecting grease for ball bearing M. G. sets ? 500
How are most horizontal machine bearings oiled?
What precautions must be taken with such devices?
500, 501 Cleanliness
Is cleanliness around a motor generator set essential? 501
Do loose connections cause much trouble? 501
Should there be ammeter and voltmeter and how
should they be located ? 501
Commutation
How should commutation be cared for? 502 to 511
What attention should be given brushes and machine before starting same ? 511
iv