Richardson's handbook of projection (1930)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

MANAGERS AND PROJECTIONISTS 1059 condition. C is a lamp, the filament of which is badly sagged ; also its globe is somewhat blackened by deposit. It is worse than foolish to keep lamps in use until they get into such condition as shown in B and C, Fig. 394. The man who takes pride in his work and values high grade service above his own ease, will remove his exciting lamp, polish its outer surface and carefully examine the glass for discoloration and the filament for signs of sagging. It is very poor business to try to "save" a few cents in exciting lamp cost, when by so doing you must and will inevitably work injury to the sound. Discard exciting lamps the moment they show any signs of filament sagging or discoloration of the globe. These defects not only lower the sound volume, but also injure the sound quality. In considering the results of filament sagging it will be well to remember that this light source is used to project a very thin line of light, described elsewhere, and that a horizontal line in its beam representing the center of the filament will carry the greatest illumination value. If this be true, and you may readily see that it is, it then follows that if the filament be sagged in any degree, no matter how slight, the most brilliant line of illumination cannot possibly be exactly adjusted upon the slit. A TEST. — I promised I would tell you how to make a really practical test for sidewise adjustment of the slit image upon the film sound track, in order to make certain it is not too far to the right or left. To do this you must obtain some Eastman negative film. Ten feet should last you quite a long while. I think likely you may get it from either Fox-Case Movietone, Tenth Ave