The sciopticon manual, explaining lantern projection in general, and the sciopticon apparatus in paricular (1877)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

32 SCIOPTICON MANUAL. common lump. E" is level, to allow the lamp (the wicks being turned down) to slide in and out. E slopes so as not to shade tho light from the condenser. F —Narrow strip of glass, quarter of an inch wide, held in a socket before the flame, to give upward direction to heated air. It will not crack from heat because it is so narrow, and without ob- structing light it takes from tho glass G its liability to crack. O —Front of flame-chamber glass It is now held in a tin frame by a wire ring, so that should it crack, it is still kept in place with- out harming the effect on the screen. G' —Back flame-chamber glass. The lamp is lighted by remov- ing this glass, and reaching the wicks with a lighted match. G G / must be in place to secure the draft. F, especially since the intro- duction of the tin frame for <?, is scarcely necessary. H —Reflector, used also to close the rear of the cylinder. The centre of concavity is at JEX, so that reflected rays are thus made to coincide with incident rays from E / to the condenser. 7—Chimney, giving large outlet to heated air. J —Chimney cap, for darkening the outlet. It may be raised to increase the draft, when the lamp gets to burning freely enough to bear it. PACKING. No instrument is forwarded without being first proved by careful trial. The oil is then poured off, and the lamp burned awhile afterwards, to prevent any further drainage should it be shipped wrong side up. Let this precaution be taken by all who pack the instrument for transportation, that there may be none of the offensive smell of oil when the instrument is unpacked and used. The wicks are left in the tubes, ready for use. Four extra wicks, with the narrow glass, J?, are tied together, which with a dozen flame-chamber glasses, Gr Gr f , are sent with each instrument. F is removed, as it is liable to fall out if inverted. For the most part Gr G' are left in place. Packing is placed between G and </, to pro-