Sound motion pictures : from the laboratory to their presentation (1929)

Record Details:

Something wrong or inaccurate about this page? Let us Know!

Thanks for helping us continually improve the quality of the Lantern search engine for all of our users! We have millions of scanned pages, so user reports are incredibly helpful for us to identify places where we can improve and update the metadata.

Please describe the issue below, and click "Submit" to send your comments to our team! If you'd prefer, you can also send us an email to mhdl@commarts.wisc.edu with your comments.




We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.

Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.

i88 SOUND MOTION PICTURES FUSE MARKING FUSE RATING "Bias" 250V-20" JACK ECX50 "Loudspeaker Fields" "15-volt Generator" 250V-1A 250V-60A CIRCUIT Bias voltage Power amplifier Loudspeaker Field Positive line; 15volt generator Failure of the fuses marked "Loudspeaker Fields" will be indicated by no sound in the auditorium loudspeakers. If the fuse marked "15-volt Generator" fails, the "Charge-Discharge" ammeter will indicate a discharge reading of about 35 amperes. If a fuse fails, do not attempt to replace it with a new one until the cause for the failure has been determined. In case a new fuse does not cure the trouble be sure to check the fuses on the panel board at the motor-generator set. D. C Batteries If the grid voltage as measured on the EC12X1 or the EC3X5 jack falls below the minimum value given in the Meter Reading Table, the batteries should be replaced. The batteries used are two 4 J volt Burgess No. 2370 and one 22|-volt No. 4156, all connected in series, as shown in T-3870180, included in envelope in the back cover of book supplied by the manufacturers. Be sure the connections on the C batteries are clean and tight, and keep a spare set of batteries on hand for replacement. E. Voltage Amplifier Tubes If the plate current readings (IPiXi,IP2Xi,or IP3X5) for any one of the three tubes is abnormal, check the grid voltage (EC12X1 or EC3X5) for this particular tube. (See Meter Reading Table, page 193.) If the grid voltage is correct and the plate current readings for the other two