We use Optical Character Recognition (OCR) during our scanning and processing workflow to make the content of each page searchable. You can view the automatically generated text below as well as copy and paste individual pieces of text to quote in your own work.
Text recognition is never 100% accurate. Many parts of the scanned page may not be reflected in the OCR text output, including: images, page layout, certain fonts or handwriting.
MOTION PICTURES 91 mentary filmstrip, same title, also avail- able. (OE 255; 13 minutes) 32, 41 Inspecting and Reconditioning Piston Assembly U.S. Office of Education, 1945. (Aircraft Work Series. Power Plant Maintenance) How to clean, inspect, and recondition the piston assembly; measure clearances; and install new piston rings. Supplemen- tary filmstrip, same title, also available. (OE 263; 22 minutes) 32, 41 Inspecting and Reconditioning Valve Assembly U.S. Office of Education, 1945. (Aircraft Work Series. Power Plant Maintenance) How to disassemble the valve mechanism; clean and recondition the parts; measure clearances; reassemble the valve mech- anism; and reinstall the pistons and cylinders. Supplementary filmstrip, same title, also available. (OE 264; 25 min- utes) 32, 41 Inspection and Preparatory Steps U.S. Department of the Navy, 1944. (Fairbanks Morse Diesel Engine Mainte- nance Series. Model 38D8 1/8 O.P.) Preliminary inspections; operation of jacking gear; draining of cooling water; inspection of rings and pistons. (MN 3691-a; 7 minutes) 41 Inspection Method. Part 1 U.S. Department of the Navy with the cooperation of U.S. Office of Education, 1944. (Optical Craftsmanship Series) How to inspect; use and check gauges; and use Newton's rings as inspection method. (MN 2449-m; 28 minutes) 41 Inspection Method. Part 2 U.S. Department of the Navy with the cooperation of U.S. Office of Education, 1944. (Optical Craftsmanship Series) How to inspect prisms and spherical lens; use spectrometer; observe slight 953821—51 7 deviations. Diagrams. (MN 2449-n; 19 minutes) 41 Inspection of Alighting Gear U.S. Department of the Air Force, 1942. (Aircraft Alighting Gear Series) Inspec- tion routine applicable to any type tri- cycle landing gear. Demonstrated on P-38. (TF 1-515; 10 minutes) 7 Inspection of Minor Assemblies U.S. Office of Education, 1944. (Aircraft Work Series. Inspection No. 2) How to inspect a minor assembly in detail; read rivet specifications; and inspect rivets. Supplementary filmstrip, same title, also available. (OE 146; 16 minutes) 7, 32, 41 Inspection of Pistons U.S. Department of the Navy, 1943. (Cooper Bessemer Diesel Engine Mainte- nance Series. Bench Work No. 2) How to inspect piston covers; piston head; measure ring clearance; remove and inspect rings and ring grooves; measure piston pin and bearings; and record measurements in machinery history book. (MN 2364-f; 10 minutes) 41 Inspection of Plumbing and Piping U.S. Office of Education, 1944. (Aircraft Work Series. Inspection No. 3) How to inspect plumbing and piping in detail; verify the materials used; inspect installa- tion of the part in the plane; and iden- tify the different plumbing lines. Sup- plementary filmstrip, same title, also available. (OE 147; 17 minutes) 32, 41 Inspection of Sheet Metal Parts U.S. Office of Education, 1944. (Aircraft Work Series. Inspection No. 1) How to plan an inspection routine; inspect a sheet metal part in detail; make a visual inspection; and make spot checks. Sup- plementary filmstrip, same title, also available. (OE 145; 20 minutes) 7, 32, 41